Cat Feeder

09 February 2025

Setting the clock

  1. Press and hold the ‘TIME’ button for 5 seconds until the hour figure on the clock starts to flash.
  2. Press the ‘+’ or ‘-’ buttons to adjust the clock to the correct hour. Hold down either the ‘+’ or ‘-’ button for longer than 3 seconds to scroll through.
  3. Press the ‘TIME’ button and the minute figure will flash. Adjust the minutes using the ‘+’ or ‘-’ buttons.
  4. Press the ‘TIME’ button to save the setting.
  5. To change the clock between 12 hour (AM/PM) and 24 hour formats, press and hold the ‘TIME’ button and within 3 seconds press the ‘+’ button.

Wait 60 seconds for the display to stop flashing and the clock to set before proceeding to the next step.

Setting meal times

  1. Press and hold the ‘TIME’ button for 5 seconds until the hour figure on the clock starts to flash.
  2. Press the ‘TIME’ button twice - the hour figure and the ‘MEAL 1’ indicator will flash.
  3. Set the meal time in the same way as setting the clock, by pressing the ‘+’ or ‘-’ buttons to adjust the hours, press the ‘TIME’ button again and adjust the minutes.
  4. When the desired meal time is displayed press the ‘TIME’ button. Repeat 3 to set ‘MEAL 2’ and ‘MEAL 3’. NOTE: If only one (or two) meals per day are required, the setting for ‘MEAL 2’ (and ‘MEAL 3’) are not relevant.
  5. When all meal times are programmed, save your settings by pressing the ‘TIME’ button repeatedly until the clock indicator displays.

Setting meal sizes

Set the meal sizes for each programmed meal time as follows:

  1. Press and hold the ‘FEED’ button for 5 seconds. The letter ‘F’ next to two zeros (‘00’) will appear and flash on the display. Press the ‘+’ or ‘-’ buttons to set the number of feed units for this meal setting.
  2. Press the ‘FEED’ button again to set the meal sizes for ‘MEAL 2’ (and ‘MEAL 3’).
  3. When all meal sizes are programmed, save your settings by pressing the ‘FEED’ button.

NOTE: Programming the feed units to two zeros (‘00’) denotes that the feed unit is set to ‘off’ and the meal indicator will not be displayed when this procedure is completed.

Once the settings are saved, the clock indicator will be shown and the programmed meal indicators will be displayed under the respective food bowl icons. The indicator representing the next meal time due to be served will flash.